topbox@topbox1:~/EtherGold/dev $ bash run_ethergold.sh
=== run_ethergold: role=edge EDGE_MODE=1 topo=spoke profile=bench pos=1 uplink=wlan1 ===
EDGE_MODE=1: elevating with sudo -E …
=== run_ethergold: role=edge EDGE_MODE=1 topo=spoke profile=bench pos=1 uplink=wlan1 ===
=== POG-EDGE bridge (role=spoke topo=spoke pos=1 bank=0) ===
  eth_lan=wlan1 (WireGuard only — not in bridge)
OK: /etc/wireguard/wg0.conf already present
uplink wlan1: already has IPv4 — skipping WiFi (re)associate
=== edge uplink wlan1 (WG transport only) ===
wlan1            UP             10.1.10.229/24 fe80::4abb:b819:d9c9:2a8/64 
WARN: wg0 already up — skipping wg-quick (run tunnel_down.sh to reconfigure keys)
Applied Endpoint 10.1.10.232:51820 from /etc/wireguard/wg0.conf
WARN: eg-s11 endpoints mismatch — leaving in place, picking another name
WARN: gretap0@NONE is stuck — skipping (reboot Pi to clear)
RTNETLINK answers: File exists
Cannot find device "gretap1"
topbox@topbox1:~/EtherGold/dev $ 


topbox@topbox4:~/EtherGold/dev $ bash run_ethergold.sh
=== run_ethergold: role=edge EDGE_MODE=1 topo=spoke profile=bench pos=4 uplink=wlan1 ===
EDGE_MODE=1: elevating with sudo -E …
=== run_ethergold: role=edge EDGE_MODE=1 topo=spoke profile=bench pos=4 uplink=wlan1 ===
=== POG-EDGE bridge (role=pos4 topo=spoke pos=4 bank=0) ===
  eth_lan=wlan1 (WireGuard only — not in bridge)
OK: /etc/wireguard/wg0.conf already present
uplink wlan1: already has IPv4 — skipping WiFi (re)associate
=== edge uplink wlan1 (WG transport only) ===
wlan1            UP             10.1.10.208/24 fe80::4bd4:e27f:3adf:1c88/64 
WARN: wg0 already up — skipping wg-quick (run tunnel_down.sh to reconfigure keys)
Applied Endpoint 10.1.10.232:51820 from /etc/wireguard/wg0.conf
WARN: gretap0@NONE is stuck — skipping (reboot Pi to clear)
WARN: gretap1 has different endpoints — skipping (no delete)
RTNETLINK answers: File exists
Cannot find device "gretap2"
topbox@topbox4:~/EtherGold/dev $